Specifications | Prices | Block Diagram

A compact stereo output stage for a modular voice with balanced line drivers suitable for long cable runs on the main outputs.

The Output Line Driver is much more than just a balanced output converter. The overall gain may be precisely calibrated between -8.5dB to +8.5dB gain to match expected levels. A pre-Level stereo aux send and return is provided for interfacing to effects units. A Spin control provides feedback to the effects unit and an "X" crossover switch swaps left and right for ping-pong effects.

A stereo compressor may be switched in on the main outputs for subtle and unsubtle tone changes. This is based on a FET design used in a well known mixing console for listen mic compression and is also similar to the output VCAs of a well known synthesizer. The compression threshold may be preset to taste and the side chain input is available as an option for external control by audio or CV signals.

The Main outputs may also be used for local patching.

A 3.5mm headphone jack for monitoring pre-Mute is provided for live use and may also be wired to a 1/4" stereo jack.

The Output Line Driver has balanced or unbalanced compatible inputs and outputs and is only available with bantam (TT) jacks. Adapter cables to other connectors may be used. Custom versions may be made with a loom to XLR or 1/4" TRS rear panel connectors.

Moulded bantam to 3.5mm adapter cables are available for £2-50 each if purchased with a module.

(Contact us for details.)

Specifications | Prices | Block Diagram