Frequently Asked Questions
Studio Installations
Custom Design and Consultancy
Recording and Mastering
Tape Baking and Recovery
Media Transfer and Processing
MIDI Long Haul Converters
MIDI Merging and Filtering
MIDI Routing Matrices
Custom MIDI Devices
EUREKA Timecode Reader
KV64 192 Key Velocity Keyboard Scanner
Z80-DIO Panel Interface Peripheral
Custom Chip Design
Digital Audio Primer
Professional MIDI Guide
MIDI Protocol Guide
Vintage Microphone Information
Legacy Products
PDFs and Other Downloads
Synthesizer Parts
MIDI Router

Confused over the emerging digital audio cable standards and practices? We can provide custom-made cabling and looms for digital audio installations with a variety of connectors (DL, D-type, XLR, BNC, Phono), all with crimped contacts conforming to SSL, Digidesign, Tascam, Yamaha or custom pinouts.

The D-type looms may be wired to Digidesign, Tascam, Yamaha or other pinouts, and adapter looms are available for connecting between different formats. Please note that all the different formats are incompatible and incorrect usage may damage equipment. If in doubt as to which type you need, please tell us what equipment you have using the quotation form.

6.5mm diameter 110 ohm cable with fully screened digital XLR connectors.

Up to 32 cores--broken out to any connector.

Used for connecting two similar AES/EBU 25-way sockets, e.g. DAW I/O to digital recorder.

Used for connecting two different AES/EBU 25-way sockets, e.g. DAW I/O to digital recorder.

Used for connecting an AES/EBU 25-way socket to individual AES/EBU stereo XLR connectors.

For original RADAR format (two D-types).

Last updated: 20 November 2010